Machine Specifications

MODEL Category Pins / mm Pipes Boom / m Arm / m Test Radius / m SWL / kg Weight of Quick Hitch / kg Engine Rate Power/ kW Fuel Tank / L Width / mm Height (to cab) / mm Length / mm Operating Weight / kg
ZX48U-5 5 45 2.68 1.69 5.02 470 63 28.2 70 1960 2530 5390 4890


Lifting Specifications – Blade above ground

Conditions Load point height Load Radius At Max Reach
1.0m 2.0m 3.0m 4.0m 5.0m
metre
Rubber shoes 400mm 3.0m *980 820 740 600 4.80
2.0m *1440 1220 980 790 680 550 660 530 5.13
1.0m 1440 1130 930 750 670 540 630 510 5.21
0 (Ground) 1390 1080 910 720 660 530 650 520 5.04
-1.0m *1920 *1920 *2580 *2070 1380 1070 900 710 740 590 4.60
-2.0m *2630 *2120 1410 1090 1000 800 3.76
-3.0m
* indicates load limited by hydraulic capacity

Lifting Specifications – Blade on ground

Conditions Load point height Load Radius At Max Reach
1.0m 2.0m 3.0m 4.0m 5.0m
metre
Rubber shoes 400mm 3.0m *980 820 *850 600 4.80
2.0m *1440 1220 *1140 790 *1010 550 *860 530 5.13
1.0m *2010 1130 *1350 750 *1070 540 *920 510 5.21
0 (Ground) *2250 1080 *1470 720 *1080 530 *1060 520 5.04
-1.0m *1920 *1920 *2580 2070 *2120 1070 *1400 710 *1090 590 4.60
-2.0m *2630 2120 *1600 1090 *1070 800 3.76
-3.0m
* indicates load limited by hydraulic capacity

Machine Specifications

MODEL Category Pins / mm Pipes Boom / m Arm / m Test Radius / m SWL / kg Weight of Quick Hitch / kg Engine Rate Power/ kW Fuel Tank / L Width / mm Height (to cab) / mm Length / mm Operating Weight / kg
ZX55-6 5 45 2.85 1.69 63 29.1 70 2000 2530 5520 4920


Lifting Specifications – Blade above ground

Conditions Load point height Load Radius At Max Reach
1.0m 2.0m 3.0m 4.0m 5.0m
metre
Rubber shoes 400mm 4.0m *0.99 0.96 *0.78 *0.78 4.40
3.0m *1.03 0.95 0.79 0.66 *0.72 0.66 5.03
2.0m *1.61 1.42 1.10 0.92 0.78 0.65 0.70 0.59 5.34
1.0m 1.61 1.32 1.05 0.88 0.76 0.64 0.68 0.57 5.41
-0 (Ground) 1.56 1.27 1.02 0.85 0.75 0.62 0.70 0.58 5.26
-1.0m *1.81 *1.81 *2.28 *2.28 1.56 1.26 1.01 0.84 0.78 0.65 4.84
-2.0m *2.82 *2.82 *3.25 2.49 1.58 1.28 1.03 0.86 1.01 0.84 4.07
* indicates load limited by hydraulic capacity

Lifting Specifications – Blade on ground

Conditions Load point height Load Radius At Max Reach
1.0m 2.0m 3.0m 4.0m 5.0m
metre
Rubber shoes 400mm 4.0m *0.99 0.96 *0.78 *0.78 4.40
3.0m *1.03 0.95 *0.8 0.66 *0.72 0.6 5.03
2.0m *1.61 1.42 *1.24 0.92 *1.09 0.65 *0.72 0.59 5.34
1.0m *2.26 1.32 *1.49 0.88 *1.18 0.64 *0.76 0.57 5.41
0 (Ground) *2.52 1.27 *1.64 0.85 *1.23 0.62 *0.87 0.58 5.26
-1.0m *1.81 *1.81 *2.28 *2.28 *2.42 1.26 *1.62 0.84 *1.08 0.65 4.84
-2.0m *2.82 *2.82 *3.25 2.49 *1.96 1.28 *1.23 0.86 *1.18 0.84 4.07
* indicates load limited by hydraulic capacity
Lifting Capacities Key

Ratings are based on ISO 10567

The load point is the centre line of the bucket pivot mounting pin on the arm.

For lifting capacities, subtract bucket and quick hitch weight from the lifting capacities.

Lifting capacity of the Zaxis series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% hydraulic  capacity.

All lifting capacities shown on this page are for guidance purposes only, please refer to the manufacturers manuals for all calculation purposes.